Modular Hardwall Cleanrooms
Wall Panels
Modular Hardwall's standard walls require little to no maintenance, are 3" thick, and have a center core of expanded polystyrene covered on both sides with white painted steel. Available optional panel surfaces include: Vinyl, HPL, FRP, PVC, Porcelain, and Stainless Steel. Other center core materials are also available.
Wall panels are attached to each other with a two-piece structural post system. Posts are manufactured from 20 gauge cold rolled steel, painted white with a matching snap in filler channel to conceal the fasteners. The two-piece design allows for a non-progressive panel system, allowing panels to be removed and replaced without disturbing adjacent panels. Posts are used to conceal electrical and telephone wiring and computer cabling as well as housing structural inserts. All panels of like sizes are interchangeable. Wall heights start at 8' and can be supplied to as tall as 30+'. Wall panels are secured to base and top. āUā channel and Starter channel is used when attaching into existing walls.
*Some Hardwall cleanrooms require more critical wall and posts design. Flush wall design and posts are available for non-progressive systems. Designs without two-piece posts are available, where panels butt together with one clean, sealable seam. Available in metal surfaces only.
Doors and Entry Ways
Single entry doors are painted steel, 1-3/4" thick, 3070 (3'x7') and come with safety viewing windows. Doors are sealed with a fully gasketed jamb and come pre-hung at factory to insure proper fit. Standard features include thresholds, commercial grade stainless steel lock sets and safety viewing windows. Doors are field adjustable and leveled to insure proper operation. Double doors (6070) come with the same finishes and features as single doors. Additional sizes include widths of 4'+ and heights from 8-10'+, optional doors and entries include single and double aluminum framed doors with full glass, air-showers, manual, motorized and hi-speed automatic roll-up doors.
Windows
Standard windows are 40" high x 45" wide, with 3/16" tempered safety glass and have beveled sills on the frames. Also available are full view windows (63" x 45"), which allow for a greater view both in and out of the cleanroom. Custom widths and heights can be supplied. Walls 15' and taller require a plunge-cut window for strength and integrity. Optional glass: 1/4" laminated, insulated, wire, tinted (UV), polycarbonate etc.