MAC 10 LEAC2

The MAC 10 LEAC2 is the 2nd generation of the MAC 10’s series of Low Watt High Output Fan Powered Filters. Just like its counterpart the MAC 10 LEAC, with its low watt AC motor (32% less than the MAC 10 Original @ 90 FPM) is rated at 800 CFM on Hi-speed, but the LEAC2 goes one step further. Unlike the MAC 10 LEAC, the LEAC comes standard with a Solid State Speed Controller (SSSC) or an optional Digital Control Card that works with Envirco remote monitoring and control system making it available in all of the normal sizes 2×4, 2×3.5, 2×3 and 2×2.


The LE series are highly recommendable for the following:
  1. Higher airflow and higher external static pressure can extend the life of your HEPA Filter 3-5 times.
  2.  If you are looking at the RSR (Room Side Replaceable) model. RSR HEP
    smaller than a standard HEPAs and will need to be replaced sooner.
  3. Local Utility costs, the LEDC can pay for its self in 36 months depending on your Kwh cost.
  4. With the Universal installed, all that would be needed for a basic digital control system is a control modual and
    a Cat 5 cable.

Cumulative Cost Per Year Chart

Cost figures are Watts at 90 FPM x 8760 hr. (24 x 365) / 1,000 x $0.09 KWH Ex.

MAC 10 Original is rated at 315 Watts at 90 FPM (315 x 8760 / 1,000 x $0.09 = $248.00)


*SSSC= Solid State Speed Controller

Compare
Category:

Additional information

Max CFM (A)

800

Max CFM (B)

111 FPM

Start-up Amps FLA - 120v

1.8

Start-up Amps FLA - 277v

.80

Running Amps (High) 120v

1.6

Running Amps (High) 277v

.060

Max. External Static Pressure @ 90 FPM

0.40”

Maximum Watts

192

BTUs @ Max CFM (Heat Load)

650

Watts @ 90 FPM

208

BTUs @ 90 FPM (Heat Load)

710

Standard Top Mounted Control

SSSC

Additional Control Options

Yes (3a)

Building Management Interface (BMS)

Yes (3a)

Optional Digital Control and Monitoring (3)

Yes (3a)

Motor / Feature

Low Watt / High Airflow AC (4)

Blower

Backward Curve

Sound @ 90 FPM (dBA)

51

Cost Per Year To Operate

$164 / Year