Cleanroom Tables


Stainless Steel Cleanroom Tables (Class 1 - 100,000)

Pre-cleaned and packaged for cleanroom applications.

Cleanroom Table
Features
  • Solid Top furnished with 1 5/8" rolled rim edge on front and back.
  • Sides are flat turned down and hemmed.
  • Sturdy solid tops are reinforced with welded stainless steel hat channels.
  • Perforated Tops are punched on 3/4' diameter holes on 1" staggered centers, designed to maximize laminar airflow.
  • 3-3/4" solid border dimension on sides.
  • 2-1/2" solid border dimension on front and back.
  • Perforated tops are reinforced with two welded stainless steel channels which run front to back on each side.
  • Tables available with stainless steel bottom shelf.
Construction
  • All TIG welded.
  • Exposed weld areas polished to match adjacent surface.
  • Stud welded hat section reinforces and maintains a level working surface.
  • Gussets welded to support hat sections.
Cleanroom Table
Material

Top

  • 16 gauge stainless steel type "304" series.
  • *48" wide solid table tops are constructed from 14 gauge type "304" series stainless steel.
  • **48" wide perforated table tops are constructed from 16 gauge type "304" series stainless steel

Legs

  • 1-5/8" diameter tubing 16 gauge type "304" series stainless steel.
  • Stainless steel gussets.
  • 1" adjustable plastic bullet feet.

Standard Stainless Steel Work Tables (Class 100 - 100,000)

Cleanroom Table
Features
  • Top is furnished with 1-5/8" sanitary rolled rim edges on 4 sides with rounded "bull nose" corners.
  • TWO hat channels stud welded to reinforce and maintain a level working surface.
  • 30" and 36" wide tables supplied with THREE hat channels.
  • Pre-engineered welded angle adapters insure ease of future drawer installation.
  • Available with stainless steel bottom shelf.
Construction
  • All TIG welded. Exposed weld areas polished to match adjacent surfaces.
  • Entire top mechanically polished to a satin finish.
  • Stud welded hat section reinforces and maintains a level working surface.
  • Gussets welded to support hat sections.
Material
  • TMS-Series: Stainless Steel Legs - Open Base.
  • Top: 16 gauge stainless steel type "304" series.
  • Stretchers: 1-5/8" dia. tubular stainless steel.
  • Legs: 1-5/8" diameter tubular stainless steel.
  • Stainless steel gussets.
  • 1" adjustable bullet feet.
  • TMG-Series: Galvanized Legs - Open Base.
  • Top: 16 gauge stainless steel type "304 series.
  • Stretchers: 1-5/8" dia. tubular galvanized steel.
  • Legs: 1-5/8" diameter tubular galvanized steel.
  • Galvanized steel gussets.
  • 1" adjustable bullet feet.

Economy Stainless Steel Work Tables

May be used in class 1,000/10,000/100,000 cleanrooms as well as some class 100 cleanrooms. This unit is not pre-cleaned.

Cleanroom Table
Features
  • ELAG Top is furnished with 1 5/8" square bend on sides and 1 5/8" rolled rim on front and rear.
  • Two hat-channels stud welded under tabletop to reinforce and maintain a level work surface.
  • Aluminum die cast "leg-to-shelf" clamp secures shelf to leg eliminating unsightly nuts and bolts.
  • Undershelf is fully adjustable.
  • Available with stainless steel bottom shelf.
Construction
  • All TIG welded. Exposed weld areas polished to match adjacent surface.
  • Top is sound deadened.
  • Stud welded hat section reinforces and maintains a level working surface.
  • Gussets welded to support hat channels.
Material
  • Top: Heavy gauge stainless steel type "430" series.
  • Shelf: 18 gauge galvanized steel.
  • Legs: 1 5/8" diameter tubular galvanized steel.
  • Galvanized steel gussets.
  • 1" adjustable plastic bullet feet.

Services and Products